**Eliminator RC actively Price matches for your benefit.**
Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.
 

DIDC0081 1-18 FPV RALLY CAR
 
DIDC0081 1-18 FPV RALLY CAR Quantity in Basket: None
Code: 707768200818
Price: $315.99
 
 
Quantity:
**Tech Notes/Specs**
This is the Electric Powered, Radio Controlled, 1/18 Scale
Ready to Run FPV Rally Car with Camera from Dromida.

*600TVL FPV Video Camera*
**25mW 40-Channel 5 Band 5.8GHz Video Transmitter**
**Tactic FPV-RM2 40-channel, 5.8GHz FPV**
monitor with 4.3" LCD and Micro Memory Card Port
**Tactic FPV-G1 Goggles**

FEATURES: Video Monitor: Tactic FPV-RM2 40-channel, 5.8GHz FPV monitor
(TACZ5152) with 4.3" (109mm) LCD and micro memory card port* and
sun shield, powered by 1S 3.7V 1400mAh LiPo battery (included)
*memory card port accepts up to 32GB memory card, not included
Video Transmitter: 25mW 40-channel, 5-band 5.8GHz
Camera: Factory Installed 600TVL FPV
Goggles: Tactic FPV-G1 Goggles (TACZ5200)
Chassis: Plastic construction with countersunk screw holes
Drive: Four wheel shaft
Differentials: Bevel gear type
Motor: Factory-installed Torque 370 motor with aluminum mount
Radio: Tactic D100 2-channel with RE-18 waterproof receiver and
speed control, and DS100 waterproof steering servo with servo save
for precise steering control, steering and throttle trims and dual
rates, servo reversing LEDs for monitoring power levels
Rally Car Battery: 6-cell, 1300mAh NiMH
Battery Charger: USB for NiMH battery
Body: Printed and decaled molded polycarbonate
Shocks: Plastic body, oil-filled, new shorter design for better
control
Shock Towers: Composite plastic
Tires: High-grip rubber
Front Bumper: Foam
Ball Bearings: Full set included

INCLUDES: RTR FPV Rally Car with Camera, Transmitter, Monitor, Goggles, LiPo
Battery for Monitor, NiMH Battery for Car, Motor, Radio System,
USB NiMH Charger, Sun Shield, Trimmed Body, Micro USB Charge Lead,
4 AA Batteries for Transmitter, Instruction Manual

REQUIRES: Track and Maintenance Equipment

SPECS:    Length: 10.9" (277mm)
Width: 5.1" (130mm)
Height: 4.25" (108mm)
Weight w/Battery: 1.3lb (590g)
Wheelbase: 6.7" (170mm)

COMMENTS: For increased speed Dromida offers a Brushless Conversion Kit
(DIDC1152) that includes a 5300Kv Brushless Motor, 25A ESC, and
other upgraded components. The Dromida 2S 7.4V 1600mAh battery
(DIDC1134) is recommended for best results and highest speed with
this conversion kit.
**Do not use a LiPo battery with the stock ESC. The stock ESC does
not have Low Voltage Cutoff, and will damage the LiPo battery.

COMMENTS:   For replacement or to upgrade to ball bearings use:
Qty.    Size    Location        Qty.        Bearing Set
4     8x12mm  Fr Uprights       2            DIDC1071
4     8x12mm  Rear Uprights     2            DIDC1071
2     8x12mm  Fr Diff           1            DIDC1071
2     8x12mm  Rear Diff         1            DIDC1071
1     8x12mm  Spur Gear         1            DIDC1071
1     6x10mm  Spur Gear         1            DIDC1070
1     6x10mm  Driveshaft        1            DIDC1070

jxs 07/14/1
ir/jx

Untitled Document


Untitled Document
 
 
My Account Info
Shopping Cart Contents
Proceed To Check-out
Online Help Desk
Contact Eliminator-RC
Newsletter Sign Up
**All pricing is subject to current exchange rates for the CDN Dollar
**Eliminator RC's prices are subject to change.
**Eliminator RC reserves the right to refuse any orders.
**All prices use the Canadian Dollar.