**Eliminator RC actively Price matches for your benefit.**
Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.
 

AX90066 SCX10 II DEADBOLT RTR
 
AX90066 SCX10 II DEADBOLT RTR Quantity in Basket: None
Code: 816874017415
Price: $419.99
 
 
Quantity:
**Tech Notes/Specs**
FEATURES: Chassis: Scale steel C-channel side rails with adjustable body mount,
adjustable bumper mounts with swaybar mounting points, mounting    
points for optional 2-speed and servo winch, adjustable chassis    
mounted servo system                                               
Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar         
driveshafts with updated design with a larger diameter crosspin    
(2x11mm) with an M4 screw shaft (2mm hex drive) for added strength 
center splined slider floats between each end with added material  
that reduces flex and fatigue                                      
Transmission: AX10 three gear layout, metal motor plate, adjustable  
ratio for high speed or competition level crawling speed, 20T      
metal drive gear, plastic idler and lower gear, optional all metal 
gear set is available, AX31585, better mounting points at base of  
transmission-no more stripped screws                               
Slipper Clutch: Dual pad design for added surface area, 32P gear     
pitch for high-torque applications                                 
Motor: 35 turn, brush equipped, water resistant, integrated cooling  
fan                                                                
Radio: Tactic TTX200 2-channel transmitter with TR325 3-ch Receiver, 
Steering Servo: Tactic TSX45 metal gear, water resistant, 151oz/in   
torque rating, dual ball bearings                                  
Receiver Box: Waterproof with separate silicone seals for antenna,   
servo wires and gasket for receiver box cover, receiver box        
located on side plates for easy access and low center of gravity   
ESC: AE-5 waterproof, switchable between LiPo or NiMH                
operation with a simple jumper-jumper 1 provides simple plug and   
play choice between LiPo or NiMH, jumper 2 switches Drag Brake     
settings, waterproof design with Star plug battery connector,      
Spur Gear: 56T 32-pitch, plastic construction                        
Pinion Gear 15T 32-pitch, steel construction                         
Battery Tray: Easy access front mount, adjustable, accomodates       
batteries up to 1.2 x 1.7 x 5.8" (32x44x147mm) 3S, 5000mAh         
Front and Rear Axles: Hardened steel                                 
AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears, optimized gear      
ratio for reduced torque twist, optional gearing choices, one-     
piece axle housing, increased clearance, larger load rated         
bearings for durability, 8
single piece axle housing, one-piece all metal locker, 10
increment adjustments for knuckle carriers and straight axle       
adapters, optimized gear ratio; 3.75 compared to 2.92 previously,  
for less torque twist                                              
Body: Trimmed and painted olive in color, dashboard, driver figure   
plastic rollbar cage with light bar (lights not included)          
Wheels: Method Hole wheels, molded composite 1.02" (26mm) wide,      
2.12" (53.9mm) construction, black in color, 12mm hex              
Tires: 1.9" Nitto Trail Grappler M/T, S30 compound with large blocks 
for excellent bite in all terrain 4.7" (119.4mm) 1.9" (48.2mm)     
wide                                                               
Shocks: Coil over, oil filled, steel springs, white in color,        
multiple mounting positions                                        
Suspension: Optimized suspension geometry with integrated mounts     
upper and lower aluminum links, 4-link design reduces axle steer   
and torque twist, and guards against suspension wrap-up in high-   
power applications, all steel links                                
Steering: Proper CMS geometry using 3-link setup with panhard bar,   
45
Front Bumper: Rigid plastic                                          
Warranty: One year bumper to bumper limited. Axial's warranty center 
Hobby Services will repair or replace any incorrectly made part.   
Proof of purchase is required for Axial to honor any warranty      
claim. Axial reserves the right to change or modify this warranty  
without notice. This warranty does not cover damages due to normal 
wear and tear, users' failure to perform routine maintenance, user 
error of assembly or installation, modifications, misuse, crash    
damage, or the addition of aftermarket parts or optional parts.    
Note: Purchasing products from unauthorized retailers may void the 
warranty and prevent support and service.                          
Repair or replacement of the product by Hobby Services is the sole 
and exclusive remedy for any loss or damages.                      

INCLUDES: RTR SCX10 II Deadbolt 4WD with Oil-Filled Shocks, Wheels, Tires,     
Painted Body, Radio, ESC, Motor, Decals, Waterproof Receiver Box,  
Light Bar (lights not included) and Instruction Manual             

REQUIRES: Battery: 6-cell NiMH or 2-3S LiPo                                    
Battery Charger: Compatible with selected battery                    
Building and track equipment                                         

SPECS:      Vehicle-                                                           
Length: 18.1" (460mm)                                                
Width: 8.8" (225mm)                                                  
Height: 9.0" (229mm)                                                 
Wheelbase: 12.0" (305mm), optional link kit allows wheelbase         
adjustment to either a 11.4" 12.0" or 12.3" wheelbase              
Ground Clearance: 2.7" (68mm)                                        
Weight: 4.65lbs (2.1kg) approximately, with electronics              
Optimized Gear Ratio: 3.75:1                                         
Final Drive Ratio (FDR): 42.00, stock                                
(33.69-54.15 with different spur/pinion gear combinations, extra   
spur and pinion gears must be purchased separately)               
Adjustable Battery Tray Dimensions: 5.75 x 1.2" (147 x 32mm)         
Body-                                                              
Length: 17.5" (444mm)                                                
Width:  6.25" (159mm)                                                
Height: 6.4" (162mm) bottom of body to top of roll cage              
3.3" (84mm) bottom of body to top of driver's door           

COMMENTS: For Replacement Ball Bearings use:                                   
Qty.   Size      Location Qty.     Qty.    Stock Number            
2   7x14mm       Ring Gear         1       AXIC4406               
2   5x14mm       Pinion gear       1       AXIC4407               
2   5x11mm       Pinion Gear       1       DTXC1547               
1   5x11x4mm     Spur Gear         1       DTXC1547               
2   10x15mm      Front Uprights    1       DTXC1595               
2   5x11mm       Front Uprights    1       DTXC1547               
2   5x11mm       Rear Axles        1       DTXC1547               
2   5x11mm       2-sp Top Shaft    1       DTXC1547               
2   5x11mm       2-sp Bottom Shaft 1       DTXC1547               
4   5x10mm       Transfer Case     1       DTXC1535               

jxs 04/19/18
ir/jxs

Untitled Document


Untitled Document
 
 
My Account Info
Shopping Cart Contents
Proceed To Check-out
Online Help Desk
Contact Eliminator-RC
Newsletter Sign Up
**All pricing is subject to current exchange rates for the CDN Dollar
**Eliminator RC's prices are subject to change.
**Eliminator RC reserves the right to refuse any orders.
**All prices use the Canadian Dollar.